General specifications |
---|
Installation | non-flush |
Measurement range | 360° |
Rotational speed | max. 100 min-1 |
Nominal ratings |
---|
Operating voltage | 18 ... 30 V |
Reverse polarity protection | reverse polarity protected |
Repeat accuracy | ± 0.25 ° |
Resolution | 0.4° |
Temperature drift | 0.02 ° / °C (-25 °C ... 70 °C) |
No-load supply current | ≤ 45 mA |
Operating voltage indicator | LED green |
Functional safety related parameters |
---|
MTTFd | 265 a |
Mission Time (TM) | 20 a |
Diagnostic Coverage (DC) | 0 % |
Switching output |
---|
Output type | 2 switch outputs PNP, NO , reverse polarity protected , short-circuit protected |
Operating current | ≤ 100 mA |
Voltage drop | ≤ 3 V |
Short-circuit protection | pulsing |
Analog output |
---|
Output type | 1 current output: 4 ... 20 mA |
Linearity error | ± 0.6 ° , (with original actuator) |
Load resistor | ≤ 400 Ω |
Compliance with standards and directives |
---|
Standard conformity | |
| Standards | EN 60947-5-2:2007 IEC 60947-5-2:2007 |
Approvals and certificates |
---|
UL approval | cULus Listed, General Purpose, Class 2 Power Source |
CCC approval | CCC approval / marking not required for products rated ≤36 V |
Ambient conditions |
---|
Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
Storage temperature | -40 ... 100 °C (-40 ... 212 °F) |
Mechanical specifications |
---|
Connection type | 5-pin, M12 x 1 connector |
Housing material | PBT |
Shaft diameter | max. 27.5 mm Steel |
Degree of protection | IP67 |
Mass | 180 g |